熔体泵、齿轮泵概述
来源：郑州巴特计量泵 发布时间：2013-11-02 08:34:23 浏览次数：次
熔体泵概述 General Information
熔体泵主要用于高温高粘度聚合物熔体的输送、增压、计量。容体泵将来自挤出机的高温塑料熔体增压。稳压后流量稳定地送入挤出机头。其稳定熔体压力、流量的能力优于各种类型的挤出机。国外广泛应用于塑料、树脂、橡胶制品的挤出成型。如：造粒、薄膜、管材、板材、片材等行业。随着机械工业的日益发展，熔体泵在国内市场也逐渐地被行业人士所采纳、应用。
Melt pump is mainly used in high temperature and high viscosity polymer melt transportation, pressurization, metering. The melt pump pressurizes and stabilizes pressure of hot melt polymers coming from the extruder, then send them into extruder dies. The pump's ability of stabilizing the pressure and flow is better than all kinds of extruders. Foreign countries widely apply in plastic, resin, rubber extrusion, such as pelletizing, film, pipes, plate, etc. With the increasing development of mechanical industries, melt pump is increasingly accepted and applied by domestic.
双曲线齿形设计Hyperbolic tooth shape design
压力脉动率更低 Lower pressure pulsation rate
防止剪切热产生Preventing shear heat
非接触免维护 Non-contact Free maintenance
螺旋密封设计Helical sealing design
无后顾之忧Free from any worries
的流道设计Advanced flow design
熔体停留时间短 Short residence time of melt stream
适用热敏性材料Suitable for heat-sensitive material
专业辅助设计软件 Professional auxiliary software design
优化轴承润滑设计 Advanced bear lubrication design
有效延长使用寿命 Prolonging the service life
郑州巴特熔体泵有限公司
主营产品：计量泵、齿轮泵、熔体泵、高温熔体泵、
熔体齿轮泵、熔体计量泵、化学泵、化工泵。
主要联系方式：
国内销售部：0371-67993077 67993177
国外销售部：0371-61682066 61682088